A lead mechanic told me to quit torqueing by feel on brake lines, and it stung but he was right
Honestly I used to think torque wrenches were overkill on small fittings, and I'd just snug by hand on lines and fittings on the 172s I help maintain at a field outside Wichita. About 8 months back a lead who has been turning wrenches for 30+ yrs watched me button up a brake line and flat out said 'you'll crack a flare doing that, pull it back apart.' He made me look up the spec, and it was 35 to 40 inch-lbs, way less than my hand was giving it. Now I keep a small inch-lb wrench in the box and check every line I touch, and I have not had a weep since. Curious if any of you still go by feel on the low-torque stuff or is the click wrench non-negotiable for you?