Went from a Fluke 77 to a 1587 and my intermittent squawk hunt got way faster
Last month I was chasing a squawk on a Cessna 172 that only showed up in humid weather, and I spent almost three days swapping the wrong stuff because my old meter was too slow to catch the voltage dip on the audio panel. A buddy at the shop in Tulsa let me borrow his Fluke 1587 for a day, and the min/max capture caught a 0.3 volt sag in about ten minutes of wiggling the harness. The difference was the logging and the faster update rate, my old 77 just could not see a blip that short. I am not saying everyone needs to run out and buy one, but for intermittent stuff the recording feature is the real deal. What do you guys use when a fault only shows up for a split second, any cheaper options that actually log data?
The min/max capture is the whole trick on those intermittent hunts, it saves you from sitting there staring at a screen waiting for a blink you will miss anyway. Your mileage may vary on the cheaper meters, but a lot of the mid range ones from Klein or the Extech models do have min/max and some have basic logging, just check the sample rate before you buy since a slow one still wont catch a half second dip. One thing that bit me before is wiggling the harness too fast, go slow and section by section so the meter has time to grab the event, otherwise you get nothing and blame the tool. Also worth trying a cheap meter with a peak hold plus a second set of eyes on the screen if you dont want to spend Fluke money. Take this with a grain of salt but for a shop that chases squawks regular, the faster update rate pays for itself pretty quick.