Why does nobody talk about cone wrenches vs. the sealed bearing swap on old hubs?
Rebuilt a set of 1980s Shimano 600 hubs last week and spent 40 minutes fiddling with cone wrenches and bearing play, then did the same job on a newer sealed hub in 20 minutes flat. The cup and cone setup kept coming loose on my test ride, so I ended up repacking it twice at my bench in Sacramento before it held right. I'm not saying sealed is always better, but the time difference for a shop doing volume is real. Anyone else find the old adjustable hubs are worth the fuss, or do you just push people toward a new wheelset?
Man, I feel this in my bones. Getting the bearing play just right on cup and cone hubs is such a fussy job, and then you ride it and it's loose again and you're back at the bench. I've had the same thing happen where I thought I nailed it and the test ride proved me wrong. The old stuff is quality and I get why people want to keep it alive, but the time sink is real when you're doing it over and over. Honestly the worst part is that tiny bit of play you can't feel in the stand but shows up the second you put weight on it. Respect for sticking with it and getting it sorted though, that kind of patience is not nothing.