Showerthought: I switched my mortar mix water and the bricks stopped sucking it dry
For the last 15 years I have mixed mortar on the wet side because that is how the old guy on my first crew in Gary showed me. Last spring I tried cutting the water down on a garden wall job and the bricks stopped pulling the moisture out so fast, which meant I could lay a full course without the bed going stiff on me. I always figured wetter mix gave me more working time, but it turns out the brick was soaking up the extra water and leaving me with dry joints anyway. Now I want to know if the sand ratio matters as much as the water, so if anyone has run that test on a small wall I would like to hear it.