I almost threw out my first cardboard furniture build, then the stress test hit 210 pounds
Last month I built a little side table out of stacked cardboard, mostly to test out a rounded edge detail before spending money on real wood. My first try looked lumpy and I set it by the curb at 11pm, honestly ready to be done with it. But before I tossed it, I threw my 210 pound neighbor on top just to see, and it held with barely any sag. That number shocked me, because I had guessed it would crush at maybe 80 pounds. Turns out the trick was running the flutes in opposite directions on every other layer, which I only did by accident on that one. Now I'm rethinking how I mock up shapes before a real build, and I'd love to know if anyone else here uses cardboard to test a design before cutting expensive stock.