3
After two tries, I finally got my kitchen backsplash layout right
I was tiling the backsplash in my 1970s kitchen and tried two different layout methods. First, I just started from the corner and worked my way across, cutting tiles as I went. It looked okay until I got to the other side and had a tiny, awkward sliver of tile next to the window frame. It drove me nuts. For the second attempt, I measured the whole wall, found the center, and dry-fit the tiles from the middle out. This meant I had equal, larger cuts on both ends. The difference was huge. The whole thing looks balanced and intentional now, not like I just ran out of space. It took an extra hour of planning but saved me from redoing the grout later. Has anyone else had a similar 'aha' moment with tile layout on a tricky wall?
2 comments
Log in to join the discussion
Log In2 Comments
alice_barnes352d ago
My grandmother taught me to always lay out the whole floor with spacers before mixing any mortar. She said a good tile job is 90 percent planning and 10 percent sticking them to the wall. That centerline method you used is the same principle. It forces you to see the problem cuts before they are permanent. I see so many DIY jobs where people just start in a corner, and the uneven end pieces give the whole project away. Your extra hour made it look professional.
1